semi-finished product
英 [ˈsemi ˈfɪnɪʃt ˈprɒdʌkt]
美 [ˈsemi ˈfɪnɪʃt ˈprɑːdʌkt]
网络 半成品; 中间产品
双语例句
- Temperature and humidity in casting workshop for sanitary ceramics are very important for the quality of semi-finished product, but the traditional drying system is mostly independent.
卫生陶瓷成型车间的温度和湿度对半成品的成品率至关重要，其热源大都采用单独供应的办法，本文介绍了利用隧道窑余热对成型车间供热的情况。 - This is applicable to the control and disposal of the raw materials, accessory parts, semi-finished product and finished products that are confirmed to be unacceptable through inspection and test.
适用于经检验和试验后判定为不合格的原材料、协配件、半成品、成品和可疑产品的控制和处理。 - In order to evaluate the trade benefits distribution under vertical specialization, this paper focuses on the price decision of semi-finished product under four different market structures.
本文通过研究四种不同市场结构下中间产品价格的决定，对垂直专业化贸易利益分配机制进行了探讨。 - CONCLUSION Limuliod reagent method can be used to inspect semi-finished product of salvia miltiorrhiza injection.
结论鲎试剂可作为检测丹参注射液半成品的方法。 - Where semi-finished product is processed in multiple Sites, all Sites must participate in the Annual Product Review process by supplying information to the Site of release.
在多处工厂加工的半成品，所有的工厂必须参与年度产品审核，并提供工厂放行的信息。 - Investigate the overview to produce the nicety foundry to make to investigate the analysis to the city of PanZhiHua semi-finished product.
调查综述对攀枝花市毛坯生产精密铸造作了调查分析。 - OBJECTIVE To establishment the limuliod reagent inspection method of bacterial endotoxin to test semi-finished product of salvia miltiorrhiza injection.
目的建立鲎试剂法检测半成品丹参注射液中细胞内毒素的方法，以适应丹参注射液生产过程较快速检验的需要。 - Other than logistic service, we also offer customer value added service on semi-finished product's package, fabrication, labeling.
除低温物流服务外，我们还可以为客户提供半成品的分装、加工、贴牌等增值服务。 - Tai Xin set up an integrated series of quality assurance system ( raw materials, semi-finished product, completed product), assuring the product quality.
公司建立了完整的产品质量保障体系（料、间产品、品）以确保出厂产品品质优良。 - The reproductive conditions of anti-lymphocyte immunoglobulin ( ALG) semi-finished product unqualified in pyrogen were studied.
对热原不合格的抗淋巴细胞免疫球蛋白（ALG）半制品再制条件进行了研究。 - The result showed that this method was rapid and accurate and can be easily applied in hospital pharmacies and in the quality control of can be semi-finished product in pharmaceutical factories.
结果表明。本法具有简便、快速、准确等特点，适合于医院药房的快速分析及制药厂半成品的质量控制。 - The semi-finished product, the construction, the material, the size and the weight of the crankshaft depend on the requirements of the type and the function of the diesel engine, which determines the ways of processing.
根据柴油机型式和性能的不同，曲轴的毛坯型式、结构、材料、外形尺寸、重量是不同的，从而决定了加工方式的不同。 - The intelligent cell was the basic unit of the knowledge node, and it was the pattern description and information processing of a specific semi-finished product task during the production process.
智能元是组成知识点的基本单位，是对产品生产中某一中间产品任务的模式描述与信息加工处理。 - The characteristics and technical requirements of cold pad-batch dyeing process are introduced, including the quality control of semi-finished product, dyestuff selection, preparation of dye bath and alkali, as well as microwave sampling.
介绍冷轧堆染色工艺的特点和技术要求，例如半制品质量的控制、染料选择、染液和碱剂的配制，以及微波炉打样法； - The Semi-finished Product Inventory Management ( SPIM) on the Network Environment and Information System Research&. Development
网络环境下的半成品库存管理及其信息系统开发研究 - Analysis on Improving Quality and Way For Extruded Semi-Finished Product From Cold Feed Extruder
提高橡胶冷喂料挤出半成品质量途径的分析 - Corn flakes can be baked by infrared or microwave oven, with moisture content of semi-finished product being 12%.
产品熟化和酥化可以采用远红外烘烤或微波炉烘制，半成品含水量控制在12%为宜。 - It has been proved by fact that using pressure forging process, the complex and curving die forging of titanium alloy swashplate will be forged through reasonably establishing process, turning the semi-finished product construction and enhancing the process quantity control.
实践证明：合理制定工艺流程和热处理规范、优化毛坯结构以及加强过程质量控制，采用模锻成形工艺是可以锻造出复杂、弯曲类钛合金斜盘毛坯。 - The results show that the pressure 、 the temperature are the key parameters and it is sure that the gas-tight semi-finished product was obtained by practicing pressure and raising temperature simultaneously.
试验表明压制温度和压力是压制工艺的两个最重要的工艺参数，同时升温与加压可以保证得到具有气密结构的预制品。 - It is confirmed that the excess of semi-finished product wall thickness difference is the main influence factor through the analysis of the factors that affect the semi-finished product quality.
通过分析影响产品毛坯质量的诸多因素，确认毛坯壁厚差超差是主要的影响因素。 - Studied the copper powder in different pressure semi-finished product to finally affect the sinter property and density and its mechanism.
研究铜粉在不同的成型压力下的压坯对最终烧结性能和烧结体密度的影响及其作用机理。 - Optimum designing for rectangular-ring semi-finished product
矩形环挤压件半成品形状优化设计 - Study On the Manufacturing Technology of Semi-finished Product of Cemented Carbide Glass Cutter
硬质合金玻璃刀毛坯生产工艺探讨 - For the high-tech industrial products enterprises in the Semi-finished Product Industry, the key of marketing has changed from product-oriented to providing customers solutions-oriented. So carrying out solution marketing is the trend in the near future.
对于处于中场产业中的高科技工业品企业来说，营销的重点已从以产品为导向转向以为客户提供解决方案为导向，因此开展解决方案式营销是企业营销的发展趋势。 - With the increasingly fierce market competition of the high-tech industrial products in the Semi-finished Product Industry, the traditional model of marketing has been difficult to adapt the demands of market that is changing frequently.
随着中场产业高科技工业品竞争的日趋激烈，传统的营销模式已经难以适应多变的市场需求。 - Construction technology is laborer uses the tools of production of various raw materials, semi-finished products processing or processing, eventually to become the method and process of product.
施工工艺是指劳动者利用生产工具对各种原材料、半成品进行加工或处理，最终使之成为成品的方法与过程。 - In steel production, the rolling process is finished or semi-finished products a key part, In this process how to improve product quality and overall efficiency is the key.
在钢铁生产中，轧制过程是成品或半成品的重要环节，在这个过程中如何提高产品质量和综合效益是我们研究的重点。 - This thesis is divided into three parts to research the solution marketing implementation in the high-tech industrial products in the Semi-finished Product Industry.
本文将解决方案式营销在中场产业高科技工业品中的实施过程分为三个部分进行研究。 - Secondly, the introduction of customized product, multi-echelon inventory model is contained semi-finished products inventory, manufacturers and retailers 'standard product inventory.
其次，引入定制后由制造商半成品库存、制造商标准产品库存和零售商标准产品库存构成的多级库存模型更加复杂。